|
This Bimetal Thermal Switch from Calco Features Lowest Temp of 0°C - 180°C
17AME-H series bimetal thermal switch is specially designed for heating, lighting and motors. The switch is focused on the low temperature range and small temperature differential also know as narrow differential. Based on the principle of bimetal heat expansion and cold contraction, the thermal switch can control the temperature of application under a very small range.
Features:
1. Both creep action and snap action are possible
2. 100% Calibrated Temperature
3. Creep Action and small temperature differential between OFF and ON Snap Action
4. Choose your wire type and length
5. Terminals can be same or opposite end
6. 100% RoHS Compliant
7. 100,000 Life cycles Product Specs: Voltage： 120V 230VAC; 12V 24VDC
Current： 5A 3A
Temperature range： 0°C - 180°C
Electrical Ratings:
1. 5A / 120V AC
2. 3A/ 230V AC
Temperature Ratings:
1. Response temperature: 0°C - 180°C
2. Tolerance:±5°C
3. Differential temperature: 5°C for creep action or 2-10°C for snap action
Applications:
1. Heated Blankets
2. Heating Pads
3. Personal care appliances
4. Other applications which need low temperature control
Special Instructions:
1. The temperature rise under calibration should be less than 1°C per 2 minutes;
2. Vacuum varnishing is not applicable. Specially treated thermal switch is possible;
3. Varnishing under room temperature is possible. The temperature has to be less than 70°C; 
|
Thermostats